Batt Insulation

When you are choosing the proper insulation for your home or business, you have a few options at your disposal. You might have considered sprinkler/spray insulation or blow-in/loose insulation. You can use batt insulation instead because it is allowed by most building codes, easier to fit, and safer. Read more to learn how you can turn to batt insulation when it is time to protect your home or business.

Batt Insulation Is Easy To Fit

When you are shopping with someone like Knauf Insulation, you will see that large sheets of batt insulation are available. However, you do not need to buy a specific size that is required. You can purchase a massive patch of batt insulation, cut that insulation, and fit it into each space with no gaps.

Plus, you can shave parts of the batt insulation from the original batch to shim small gaps that you find while completing the job.

Batt Insulation Is Safer

Batt insulation is safer to use than traditional loose or spray insulation because it does not fall in your face or create a floating gas as you complete the installation. Yes, you should wear a face mask when you are installing the insulation, but you do not need to worry about debris falling all over the room. Plus, you do not need to open a window simply to install the insulation.

Batt Insulation Meets Most Building Requirements

You can put batt insulation anywhere that you like. It has been approved for most interstitial insulation needs. Plus, you need to make sure that you have used the insulation in the ceilings, walls, and subfloors or all the rooms that you are renovating or remodeling.

You could use batt insulation in new construction projects, and you can cut from the large batch as you try to fit the insulation in each gap that you have found in the room. This is a very simple thing to do because you do not need to plan every panel before the work begins. You simply measure and cut as needed. Plus, the insulation can sit around for as long as you need until the work is done. Loose insulation cannot be left out in the open, and you do not want pressurized canisters of insulation to sit in a hot room while you are working.

Batt Insulation Offers More Protection

The batt insulation that you order is stacked together to give you as much protection as you need. There are several different thicknesses that you can choose, and each subsequent thickness provides you with more and more protection. You can start with 3 1/2 inch standard, 3 5/8, 3 1/2 high density, or 5 1/4 high density.

If you want more protection, you can try 6 or 6 1/4, 8 or 8 1/4, 9 1/2, or even 12 inch thicknesses. The cost of the insulation rises as it gets thicker, but you get heavy batches of insulation to cut from.

Conclusion

When you are installing new insulation, you can choose batt insulation instead of a spray or loose insulation. These products are easy to use because they can be cut from a large batch. Plus, you can measure each part of the system with ease. You will find that the batt insulation can be used to shim gaps, and you can put it in every part of the house to meet the local building requirements.